Search This Blog

Windows Hack Boot Win XP Fast

Boost Faster PC


A great new feature in Microsoft Windows XP is the ability to do a boot defragment. This places all boot files next to each other on the disk to allow for faster booting.
By default this option is enabled,but on some systems it is not, so below is the information on how to turn it on:
Go to Start Menu and Click Run Type in regedit then click ok Find

"HKEY_LOCAL_MACHINESOFTWAREMicrosoftDfrgBootOpt imizeFunction"
Select "Enable" from the list on the right on it, and select "Modify" Change the value to Y .
Reboot your Pc and see the change yourself.
***************************************************************************


How To Speed Up Your Pc.,
Just Do The Below Steps Carefully

> Right Click On My Computer
>Properties
>Advanced
>Performance
>Advanced
>Virtual Memory-Change

Keep Initial Size
Same & Max Size Double

Try This.

***************************************************************************

Windows Hack Boot Win XP Fast

When we shutdown the pc. It closed its all running programs and all process of processor. Then we shall have to stop for some time. I have a trick that kill the all process and do fast shutdown the pc and starup pc.


Follow the following steps

1.
Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\

2. From the Start menu, select "Run..." & type "gpedit.msc".

3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.

4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".

5. Click "OK", "Apply" & "OK" once again to exit.

6. From the Start menu, select "Run..." & type "devmgmt.msc".

7. Double click on "IDE ATA/ATAPI controllers".

8. Right click on "Primary IDE Channel" and select "Properties".

9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device
Type' greyed’ out select 'none' instead of 'autodetect' & click "OK".

10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.

11. Reboot your computer.
***************************************************************************